Part IV
VELOCITY CHANGE
Modify the recorded velocity in specific measures
of specific tracks.
∧
1.
Use the TRACK
and
track you wish to edit.
• You cannot select the track for the CONTROL,
RHYTHM or CHORD part.
• If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEASURE
to specify the start point (measure number) of
the velocity change.
3.
Use the LAST MEASURE
specify the end point (measure number) of the
velocity change.
∧
4.
Use the VELOCITY
the change in velocity.
• The value you select will be added to or de-
leted from the current velocity.
5.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
106
QQTG0671
∨
buttons to select the
∧
∨
and
buttons
∧
∨
and
buttons to
∨
and
buttons to specify
TRANSPOSE
Change of key of specific measures of specific
tracks.
∧
1.
Use the TRACK
and
track you wish to edit.
• You cannot select the track for the CONTROL,
RHYTHM or CHORD part.
• If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEASURE
to specify the start point (measure number) of
the transpose.
3.
Use the LAST MEASURE
specify the end point (measure number) of the
transpose.
4.
Use the TRANSPOSE
specify the change in pitch.
• Increments are in semitones. A value of 12 is
one octave. A – value lowers the pitch, and a
+ value raises it.
5.
Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
Sequencer
∨
buttons to select the
∧
∨
and
buttons
∧
∨
and
buttons to
∧
∨
and
buttons to