Technics SX-KN7000 Operating Instructions Manual page 33

• The PANIC function interrupts the sound, for
example, when it fails to cease during a MIDI
performance.
5.
While pressing the SET button, specify where
you wish to paste (put) the item.
• While the SET button is depressed, the display
appears as shown below. Use the buttons to
the left and right of the display to specify where
you wish to paste the item.
6.
Repeat steps 4 and 5 to create the display you
want.
• There are nine settable items on the display.
7.
On the FAVORITES SETTINGS display, press
the OK button.
• Your customized display is stored.
8.
Press the BANK NAMING button.
• The display looks similar to the following.
Recall a FAVORITES display
1.
Press the FAVORITES button to turn it on.
2.
Press the 1, 2, 3 or 4 button to specify the
bank you wish to recall.
3.
Use the buttons to the left and right of the
display to specify the ITEM you wish to recall.
• The FAVORITES settings can be saved to a
disk.
9.
Use the buttons below the display to assign a
name to your customized display.
• Press the ABC button to enter alphabetical
characters. While
pressed, upper case letters are entered.
• Press the 123 button to enter numbers, etc.
While the SHIFT button is pressed, you can
enter symbols.
• Press the POSITION button to move the cur-
sor.
• You can also use the TEMPO/PROGRAM dial
to select the characters.
• Press the INS button to enter a space at the
cursor position.
• Press the DEL button to erase the character
at the cursor position.
• Press the CLR button to erase the entire
name.
• Press the →← button to center the name.
10.
When you have finished assigning a name to
your customized display, press the OK button.
the SHIFT button is
33
QQTG0671