Clock Settings; Child Lock - Panasonic Diga DMR-ES20 Operating Instructions Manual

Clock settings

•
Usually, the unit's Preset Download or Auto-Setup function (➔ page 10, 11) automatically adjusts the clock to correct time. Under some
reception conditions, however, the unit cannot set the clock automatically.
•
In this case, follow the operation steps below to manually set the clock.
•
In the case of a power failure, the clock setting remains in memory for approximately 60 minutes.
1
While stopped
Press [FUNCTIONS].
2
Press [e, r] to select "To Others" and press [ENTER].
3
Press [e, r] to select "SETUP" and press [ENTER].
4
Press [e, r] to select "Others" and press [q].
5
Press [e, r] to select "Clock" and press [ENTER].
Auto Clock Setting
If a TV station transmits a time setting signal, and when "Automatic"
in the Clock setting menu is set to "On", the automatic time
correction function checks the time and if necessary it is adjusted
several times every day.
6
Press [e, r] to select "On" of
"Automatic" and press [ENTER].
Auto clock setting starts.
The following screen appears when setting is complete.
Clock
Automatic
Time Date
15 : 45 : 39 1 . 8
Automatic clock setting completed.
CHANGE
ENTER: access RETURN: leave
ENTER
RETURN
To stop partway
Press [RETURN].
•
If the unit cannot set the clock automatically, set the clock
manually (➔ right, "Manual Clock Setting" Step 6).
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].

Child Lock

SKIP
DIRECT NAVIGATOR
TOP MENU
SUB MENU
PROG/CHECK
DISPLAY
REC REC MODE
CREATE
AUDIO
CHAPTER
On
. 2005
SLOW/SEARCH
FUNCTIONS
ENTER
RETURN
RETURN
STATUS TIME SLIP
EXT LINK EXT LINK TIMER
ERASE F Rec
Manual Clock Setting
6
Press [e, r] to select "Off" of
"Automatic" and press [ENTER].
Clock
Automatic Off
Time Date
15 : 45 : 39 1 . 8
No.
0 9
Please set clock manually.
CHANGE
SELECT
ENTER: store RETURN: leave
ENTER
RETURN
7
Press [w, q] to select the item you
want to change.
The items change as follows:
Hour Minute Second
8
Press [e, r] to change the setting.
You can also use the numbered buttons for setting.
9
Press [ENTER] when you have
finished the settings.
The clock starts.
The Child Lock deactivates all buttons on the unit and remote
control. Use it to prevent other people from operating the unit.
Press and hold [ENTER]
and [RETURN]
simultaneously until
"X HOLD" appears on the unit's display.
If you press a button while the Child Lock is on, "X HOLD" appears
on the unit's display and operation is impossible.
To cancel the Child Lock
Press and hold [ENTER] and [RETURN] simultaneously until
"X HOLD" disappears.
. 2005
Day Month Year
RQT8212
39