Common Procedures; Clock Settings - Panasonic DMR-ES20 Operating Instructions Manual

Changing the unit's settings
Numbered
buttons
SETUP

Common procedures

Preparation
•
The settings remain intact even if you switch the unit to standby.
•
Turn on the television and select the appropriate video input to suit
the connections to this unit.
•
Turn the unit on.
1
While stopped
Press [SETUP].
SETUP
Channel
Setup
2
Press [e, r] to select the tab and
press [q].
3
Press [e, r] to select the menu and
press [ENTER].
4
Press [e, r] to select the option and
press [ENTER].
Note
There may be differences in operation methods. If this happens,
follow the on-screen instructions for the operation.

Clock settings

In the case of a power failure, the clock setting remains in memory
for approximately 1 minute.
1
While stopped
Press [SETUP].
2
Press [e, r] to select "Setup" and
press [q].
3
Press [e, r] to select "Clock
Settings" and press [ENTER].
Set Clock Automatically
4
Press [e, r] to select "Set Clock
Automatically" and press [ENTER].
5
Press [ENTER].
Auto setting starts. This can take some time, up to a few
minutes in some cases. The following screen appears when
setting is complete.
RQT8152
34
Downloaded From Disc-Player.com Panasonic Manuals
AUDIO
VCR Plus+
CANCEL
CM SKIP
SKIP SLOW/SEARCH
DIRECT NAVIGATOR FUNCTIONS
TOP MENU
SUB MENU RETURN
SCHEDULE
DISPLAY STATUS TIME SLIP
REC REC MODE ERASE ADD/DLT
CREATE
OPEN/CLOSE SETUP F Rec
CHAPTER
Tabs Menus Options
Signal Source (RF IN) CableTV
Set Channels Automatically
Channel Captions
Preset Channel Captions
M l Ch l C ti
SETUP
Channel
•
If the time was not set correctly, use manual clock setting or time
zone adjust.
•
DST, Daylight Saving Time, shows the summertime setting.
•
Time Zone shows the time difference from Greenwich Mean Time
(GMT).
EST (Eastern Standard Time) = GMT –5
CST (Central Standard Time)
e, r, w, q
MST (Mountain Standard Time) = GMT –7
ENTER
PST (Pacific Standard Time)
AST (Alaska Standard Time)
RETURN
HST (Hawaii Standard Time)
For other areas: xx hr
6
Press [ENTER].
To cancel partway
Press [RETURN].
Adjust Time Zone
Adjust the time zone (–1 or +1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manually.
4
Press [e, r] to select "Adjust Time
Zone" and press [ENTER].
SETUP
Channel
5
Press [e, r] to select "–1" or "+1" and
press [ENTER].
Set Clock Manually
4
Press [e, r] to select "Set Clock
Manually" and press [ENTER].
SETUP
Channel
5
Press [w, q] to select the item you
want to change and press [e, r] to
change the setting.
DST (Daylight Saving Time): On or Off
If you select "On", the clock is advanced one hour starting at
2 a.m. on the first Sunday in April and ending at 2 a.m. on
the last Sunday in October.
Time Zone (Ô above)
6
Press [ENTER].
The clock starts.
To exit the screen
Press [SETUP].
To return to the previous screen
Press [RETURN].
Set Clock Automatically
Auto Clock Setting is complete.
Setup
4/4/2002 12:15 AM
Disc
DST............. On
Time Zone.... CST
Video
Audio
= GMT –6
= GMT –8
= GMT –9
= GMT –10
Adjust Time Zone
1
0
1
Setup
Disc
Video
Set Clock Manually
Month Day Year Hour Minute
1 1 2000 12 00
/ / SAT :
Setup
DST Time Zone
Disc
EST
Off
Video
AM