Off Timer
Select how long the unit remains on when it is not being used.
Perform step 1 of "Accessing the Setup Menu" (
, to select "Setup", then
, to select "Off Timer", then
, to select "2 Hours", "6
Hours" or "Off", then
Remote Control
Use this function to synchronize the codes for the remote
control and the main unit.
Perform step 1 of "Accessing the Setup Menu" (
, to select "Setup", then
, to select "Remote Control", then
, to select "Set Code 1", "Set
Code 2", or "Set Code 3" then
OK
While pressing and holding
and hold the numbered button
or
3
step 4 for about 5 seconds to set.
OK
Clock Settings
Perform step 1 of "Accessing the Setup Menu" (
, to select "Setup", then
, to select "Clock Settings", then
Set Clock Manually
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
After selecting "Clock Settings" (
OK
to set.
OK
corresponding to the code set in
to complete.
above, step 3).
, to select "Set Clock
Manually", then
52).
, to select the item you want
to change.
OK
, to change the setting.
– Repeat steps 5–6 to change other items.
OK
time and to initiate the clock.
Set the time change dates for DST
Set the beginning and end dates for DST. (
52).
Quick Start
One Sec. Quick Start for Recording on DVD-RAM. From the power
off state, recording on DVD-RAM starts about one second after
fi rst pressing the [ DVD/VHS POWER] and then sequentially
pressing [REC] (Quick Start Mode). Power consumption is also
higher when the unit is turned off if this is set to "On".
Perform step 1 of "Accessing the Setup Menu" (
OK
, to select "Setup", then
, to select "Quick Start", then
OK
, press
, to select "On" or "Off", then
1
,
2
,
OK
Restore Default Settings
This returns Setup menus to default settings, except for the
clock, ratings level, closed caption, and on-screen language.
Perform step 1 of "Accessing the Setup Menu" (
, to select "Setup", then
52).
, to select "Restore Default
Settings", then
OK
, to select "Yes" or "No",
then
OK
to confi rm new date and
12).
OK
OK
52).
52).
53