Clock Settings - Panasonic Diga DMR-EZ47 Operating Instructions Manual

Other Settings

Clock Settings

Set Clock Automatically
With the unit stopped
,  to select "Other Functions",
then
ENTER
,  to select "Setup",
then
ENTER
,  to select "Setup",
then .
,  to select "Clock Settings",
then
ENTER
,  to select "Set Clock
Automatically", then
ENTER
to start auto setting.
The following screen appears when the setting
is complete.
Set Clock Automatically
Clock Setting completed successfully.
4/4/2007 11:15 AM
DST-----------
Time Zone----
ENTER
ENTER
to complete.
66
RQT8853
ENTER
On
EST
Notes
 This may take some time, up to a few hours in some cases.
 If the following message appears
Setup
Set Clock Automatically
Setting completed as follows.
Channel
Finish the setup with this clock time?
Note:Selecting"No"will start channel scanning
Setup
again and renew the clock time.
Disc
Yes
No
Video
Audio
12/14/2007 5:28 AM
DST----------- Off
Display
Time Zone---- EST
TV Screen
VHS
ENTER
If the time is correct, press [] to select "Yes", then press [ENTER].
– If you select "No", auto setting starts again, then the above
screen reappears. Repeat this step until the correct time appears.
 If the clock is not correct, set the clock with "Adjust Time Zone"
( 67) or "Set Clock Manually" (
Tips
 To cancel in the middle
Press [RETURN].
 Time Zone
Time Zone shows the time difference from Greenwich Mean Time
(GMT).
EST (Eastern Standard Time)
CST (Central Standard Time)
MST (Mountain Standard Time)  GMT 7
PST (Pacifi c Standard Time)
AST (Alaska Standard Time)
HST (Hawaii Standard Time)
For other areas: xx hr
 DST (Daylight Saving Time)
If you select "On", the clock is advanced one hour starting at
2 a.m. on the second Sunday in March and ending at 2 a.m. on the
fi rst Sunday in November.
Set the DST period manually when it varies according to regions
( 63).
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
48).
 GMT 5
 GMT 6
 GMT 8
 GMT 9
 GMT 10