Clock Settings; Child Lock - Panasonic DMR-E55EBL Operating Instructions Manual

Changing the unit's settings
Refer to the control reference on page 38.

Clock settings

Usually, the unit's Preset Download or Auto-Setup function ( page 11, 12) automatically adjusts the clock to correct time. Under some reception
conditions, however, the unit cannot set the clock automatically.
In this case, follow the operation steps below to manually set the clock.
≥In the case of a power failure, the clock setting remains in memory for approximately 60 minutes.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select "SETUP" and press [ENTER].
3
Press [3, 4] to select the "Others" and press [1].
4
Press [3, 4] to select "Clock" and press [ENTER].
Auto Clock Setting
If a TV station transmits a time setting signal, and when "Automatic"
in the Clock setting menu is set to "On", the automatic time
correction function checks the time and if necessary it is adjusted
several times every day.
5
Press [3, 4] to select "On" of
"Automatic" and press [ENTER].
Auto clock setting starts.
The following screen appears when setting is complete.
Clock
Time
15 : 45 : 39
Automatic clock setting completed.
CHANGE
ENTER: access
ENTER
RETURN
To stop partway
Press [RETURN].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].

Child Lock

DIRECT NAVIGATOR
ENTER
RQT7540
44
On
Automatic
Date
1 . 8 . 2004
RETURN: leave
STOP PAUSE PLAY/x1.3
FUNCTIONS
TOP MENU
ENTER
SUB MENU RETURN
RETURN
PROG/CHECK
DISPLAY STATUS TIME SLIP
TIMER ERASE REC MODE REC
F
Manual Clock Setting
5
Press [3, 4] to select "Off" of
"Automatic" and press [ENTER].
Clock
Automatic Off
Time Date
15 : 45 : 39 1 . 8 . 2004
No.
0 9
Please set clock manually.
CHANGE
SELECT
ENTER: store RETURN: leave
ENTER
RETURN
6
Press [2, 1] to select the item you
want to change.
The items change as follows:
Hour!#Minute!#Second!#Day!#Month!#Year
^-----------------------------------------------------------------------------------------J
7
Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
8
Press [ENTER] when you have
finished the settings.
The clock starts.
The Child Lock deactivates all buttons on the unit and remote
control. Use it to prevent other people from operating the unit.
Press and hold [ENTER]
and [RETURN]
simultaneously until "X
HOLD" appears on the unit's display.
If you press a button while the Child Lock is on, "X HOLD" appears
on the unit's display and operation is impossible.
To cancel the Child Lock
Press and hold [ENTER] and [RETURN] simultaneously until "X
HOLD" disappears.