Off Timer; Remote Control; Clock Settings - Panasonic DMR-EZ48K Operating Instructions Manual

, then
OK
11
Enter a 4-digit password with the
numbered buttons, then
A screen appears confi rming that you have set a
–
password. Press [OK].
If you select "Off" for "Set":
A screen appears confi rming that you haven't set a
rating. Press [OK].
To change the password
After selecting "Parental Rating" (
Enter a 4-digit password with the
numbered buttons, then
 ,  to select "Change
Password", then
Enter the new password with the
numbered buttons, then
A screen appears confirming that you have set a
–
password. Press [OK].
Tips
To clear the password
( 81, To reset the ratings level settings)
Notes

Recording may fail when a wrong password was entered for
scheduled recording settings.

"V-chip" technology enables restricted shows to be locked
according to TV ratings.

The V-chip system that is used in this set is capable of blocking
"NR" programs (non rated, not applicable and none) as per
FCC Rules Section 15.120(e)(2). If the option of blocking "NR"
programs is chosen "unexpected and possibly confusing results
may occur, and you may not receive emergency bulletins or any of
the following types of programming:"
– Emergency Bulletins (Such as EAS messages, weather
warnings and others)
– Locally originated programming
 
News Political
– Public Service Announcements
  
Religious Sports Weather
OK
56, step 5).
OK
OK
OK

Off Timer

Select how long the unit remains on when it is not being used.
Perform steps 1−3 of "Accessing the Setup Menu" (
,  to select "Setup", then 
,  to select "Off Timer", then
OK
,  to select "2 Hours", "6
Hours" or "Off", then

Remote Control

Use this function to synchronize the codes for the remote
control and the main unit.
Perform steps 1−3 of "Accessing the Setup Menu" (
,  to select "Setup", then 
,  to select "Remote Control",
then
OK
,  to select "Set Code 1", "Set
Code 2", or "Set Code 3" then
to set.
OK
While pressing and holding
press and hold the numbered button
1 , 2 , or 3
the code set in step 6 for about
5 seconds to set.
OK
to complete.

Clock Settings

Perform steps 1−3 of "Accessing the Setup Menu" (
,  to select "Setup", then 
,  to select "Clock
Settings", then
55).
OK
55).
OK
,
corresponding to
55).
OK
RQT9056
57