Installing The Cpu 1515Sp Pc - Siemens simatic ET 200SP User Manual

Installing

4.3 Installing the CPU 1515SP PC

4.3 Installing the CPU 1515SP PC
Requirements
The mounting rail is fitted.
Required tools
3 to 3.5 mm screwdriver (only to fix the strain relief and dismantle the BusAdapter)
Fixing strain relief
Fix the strain relief on the top and the bottom of the left-hand side of the CPU 1515SP PC
with the supplied screws.
Installing the CPU 1515SP PC
1. Install the CPU on the mounting rail.
2. Swivel the CPU back until you hear the mounting rail release click into place
3. To check that the CPU has correctly clicked into place, pull on the underside of the
enclosure.
Figure 4-2
32
Installing the CPU 1515SP PC
CPU 1515SP PC
Manual, 12/2014, A5E32701806-AA