Technical Data; Standards And Approvals - Siemens simatic ET 200SP User Manual

Technical data

10.1

Standards and approvals

Introduction
The general technical specifications cover the following:
● The standards and test values that the CPU 1515SP PC complies with and fulfills.
● The test criteria according to which the CPU 1515SP PC was tested.
Currently valid markings and approvals
Note
The currently valid markings and approvals are printed on the CPU 1515SP PC.
Safety information
Risk of personal injury and damage to property.
In hazardous atmospheres, injury to persons and material damage may occur if you
disconnect plug-in connections during operation of an ET 200SP.
Always switch off the power to the ET 200SP when disconnecting plug-in connections in
hazardous atmospheres.
Flying sparks due to loose cables
Risk of explosion in hazardous areas.
USB cables and PROFINET connectors may detach from the device in the case of strong
oscillation and high vibrating loads.
Attach these cables to the strain relief of the device using cable ties.
82
WARNING
WARNING
10
CPU 1515SP PC
Manual, 12/2014, A5E32701806-AA