Mounting The Simotion D410-2 In The Power Module Chassis - Siemens SIMOTION D410-2DP/PN Installation Manual

3.4

Mounting the SIMOTION D410-2 in the power module chassis

Figure 3-3
The DRIVE-CLiQ cable and the cable for the 24 V supply must be correctly routed so that the
front flap can close.
Note
For the power module, a connecting cable is also supplied for the power supply of the
SIMOTION D410-2. This cable must be connected to the SIMOTION D410-2.
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015
3.4 Mounting the SIMOTION D410-2 in the power module chassis
Mounting the CU310, for example, in the power module chassis, FX frame size
Installing
43