Mounting The Cu310 In The Power Module Chassis - Siemens SINAMICS S120 Manual

3.2.5

Mounting the CU310 in the Power Module Chassis

Figure 3-35
The DRIVE-CLiQ cable and the cable for the 24 V supply must be correctly routed so that
the front flap can close.
Note
For the Power Module, a connecting cable is also supplied for the power supply of the
CU310. Customers must connect-up this cable.
This means that the CU310 no longer has to be supplied from an external 24 V DC.
AC Drive
Manual, (GH6), 07/2007 Edition, 6SL3097-2AL00-0BP2
Mounting the CU310 in the Power Module chassis format, frame size FX
Power Modules
3.2 Power Modules Chassis
111