Configuring The Ethernet Connection In Hw Config - Siemens SIMOTION D410-2DP/PN Installation Manual

Table of Contents

Advertisement

Default Ethernet addresses
The following IP addresses are assigned by default for the Ethernet interface:
Table 6-8
Interface
X127 P1 PN/
IE
Note
The IP addresses 192.168.215.240 to 192.168.215.255 are reserved for internal
communication in the SIMOTION D410-2 (subnet mask 255.255.255.240). When configuring
the external Ethernet interface (X127 P1), make sure that the internal addresses are not inside
their network. In IP, the network is defined as an AND link of IP address and subnet mask.
Note
If you want to go online via Ethernet, you have to make sure that the connection from PG/PC
to SIMOTION D410‑2 is active. You can check this in NetPro. You will find a description of
how to reactivate the connection in Section Establishing a PG/PC assignment (Page 122).
6.6.2

Configuring the Ethernet connection in HW Config

The Ethernet connection of the SIMOTION D410‑2 can be configured in HW Config.
Procedure
1. Open your project.
2. Open HW Config. Double-click the Ethernet port (X127 P1) to open the "Properties - PNxIE"
dialog box.
3. You can configure the Ethernet connection in the "Options" tab.
Recommendation: Use the default setting "Automatic setting". With Automatic setting, the
baud rate and duplex operating mode are automatically aligned with the connection partner.
The autocrossing functionality is also available so that you can use crossed and uncrossed
cables.
If transmission is to be set manually, not only must the connection (e.g. 10 Mbit/s half
duplex) be set manually but autonegotiation must also be deactivated.
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015
IP address assignment for SIMOTION D410‑2
Use case
Insert SIMOTION device or
HW Config
SIMOTION D410‑2 in the de‐
livery condition
Parameter assignment / addressing
6.6 Configuring an Ethernet subnet
Default address
IP address:
Subnet mask:
Router address:
Automatic private IP address
IP address:
Subnet mask:
Router address:
Automatic private IP address
169.254.11.22
255.255.0.0
0.0.0.0
169.254.11.22
255.255.0.0
0.0.0.0
135

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simotion d410-2 dp

Table of Contents