Residual Risks Of Power Drive Systems - Siemens SIMOTION D410-2DP/PN Installation Manual

Safety instructions
1.1 Fundamental safety instructions
Danger as a result of unsafe operating states resulting from software manipulation
Software manipulation (e.g. by viruses, Trojan horses, malware, worms) can cause unsafe
operating states to develop in your installation which can lead to death, severe injuries and/
or material damage.
● Keep the software up to date.
● Incorporate the automation and drive components into a state-of-the-art, integrated
● Make sure that you include all installed products into the integrated industrial security
1.1.5

Residual risks of power drive systems

The control and drive components of a drive system are approved for industrial and commercial
use in industrial line supplies. Their use in public line supplies requires a different configuration
and/or additional measures.
These components may only be operated in closed housings or in higher-level control cabinets
with protective covers that are closed, and when all of the protective devices are enabled.
These components may only be handled by qualified and trained technical personnel who are
knowledgeable and observe all of the safety instructions on the components and in the
associated technical user documentation.
18
WARNING
Information and newsletters can be found at:
http://support.automation.siemens.com
industrial security concept for the installation or machine.
For more detailed information, go to:
http://www.siemens.com/industrialsecurity
concept.
Commissioning and Hardware Installation Manual, 01/2015
SIMOTION D410-2