Program Coordination - Siemens sinumerik 840d Programming Manual

04.00
1
840D 840D
NCU 571 NCU 572
NCU 573
1.13

Program coordination

Channels
A channel can process its own program
independently of other channels. It can control
the axes and spindles temporarily assigned to it
via the program.
Two or more channels can be set up for the
control during startup.

Program coordination

If several channels are involved in the
machining of a workpiece it may be necessary
to synchronize the programs.
Special instructions (commands) are available
for program coordination. Each instruction is
programmed separately in a block.
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) − 04.00 Edition
FM-NC 810D 840Di
Flexible NC programming
1.13 Program coordination
1
1-63