Siemens sinumerik 840d Programming Manual page 401

08.97
11
840D 840D
NCU 571 NCU 572
NCU 573
Option value
0
1
2
3
4
8
16
32
64
128
256
Several options are appended with plus characters.
Example:
OSCTRL[Z] = (1+4,16+32+64)
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Advanced (PGA) – 04.00 Edition
FM-NC 810D 840Di
Meaning
When the oscillation is deactivated, stop at the next reversal point (default)
only possible by resetting values 1 and 2
When the oscillation is deactivated, stop at reversal point 1
When the oscillation is deactivated, stop at reversal point 2
When the oscillation is deactivated, do not approach reversal point if no
spark-out strokes are programmed
Approach end position after spark-out
If the oscillation movement is cancelled by deletion of the distance-to-go:
then execute spark-out strokes and approach end position if appropriate
If the oscillation movement is cancelled by deletion of the distance-to-go:
reversal position is approached as with deactivation
New feed is only active after the next reversal point
FA = 0: Path overlay is active
FA 0: Speed overlay is active
For rotary axis DC (shortest path)
0=The sparking out stroke is a dual stroke.(default) 1=single stroke.
11.1 Asynchronous oscillation
Oscillation
11
11-401