Omron BU1002SW Instruction Manual page 97

● How to set up UPS service (set the time to shut down Windows)
1) After performing the setup described in the previous section, click the "Confi gure (C)" button in the
"Power supply options" window.
2) In the "Warning" box, place a check mark in the box to the left of "Time from when battery drive starts
until warning is issued (M)" by clicking on it.
In the window to the right, set the amount of time to wait before starting Windows shutdown after a
power failure occurs. (Setting range: 2 to 720 minutes)
Click the "OK" button.
Check
BU
Click
1002 3002
SW / BU SW
Click
Set
7
75