Omron BU1002SW Instruction Manual page 81

3. Turn the 2 screws that fi x the plate cover anti-clockwise to remove them. ➀
While pulling the plate cover toward you ➁, lift it up and remove the lower battery connector from the
eyehole.
Remove the 2 screws.
4.
Hold the pullout label at the bottom of the battery pack and remove the battery pack.
Remove the upper and lower sections one by one.
Do not hold the connector or cable of the battery pack.
Use the red tape on the top of the battery pack, which is 10 cm from the inner edge of the battery, to
gauge how much further you need to pull the battery to remove it. Hold the battery securely with both
hands so as not to drop it.
Battery pack
(Upper)
Pullout label
(Pull this to remove.)
1
Battery connector
Battery pack
(Lower)
1002 3002
BU SW / BU
2
Red tape
SW
6
59