Connecting The Camera To A Router That Supports Upnp - Panasonic BL-C1A Operating Instructions Manual

Operating Instructions
3.
Click [Save] when finished.
• The new settings are saved.
• When finished, "Success!" is displayed.
4.
Click [Go to UPnP page].
• The UPnP page is displayed.
2.4.1 Connecting the Camera to a Router that Supports
UPnP™
To allow access from the Internet with a router supporting UPnP
procedures shown in Getting Started.
Note
• On some routers, the UPnP
router's UPnP
camera. See the Panasonic Network Camera support website at http://
panasonic.net/pcc/support/netwkcam/ for details.
• If a maximum idle time is set in PPPoE or PPTP connection with your ISP,
disable it on the router. See the router manual for details.
feature is disabled by default. Enable your
TM
feature following the router manual before you set up the
TM
, follow the
TM
40