Connecting The Camera To A Router Supporting Upnp - Panasonic BL-C10A Installation/Troubleshooting Manual

Installation/Troubleshooting
• If the camera is using a port number other than 80, the port number must be
specified at the end of the Viewnetcam URL. For example:
Using port 80: http://(Cameraname).viewnetcam.com
Using any other port: http://(Cameraname).viewnetcam.com:Port Number
1.4 Connecting the Camera to a Router
Supporting UPnP
To allow access from the Internet with a router supporting UPnP, follow the
procedures shown in the Getting Started.
Notes
• In some routers, the UPnP feature is disabled by default. Enable your
router's UPnP feature following the router manual before you set up the
camera. See the PanasonicNetwork Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for details.
• If the maximum idle time is set in PPPoE or PPTP connection with your
ISP, disable it on the router. See the router manual for details.
10