Konica Minolta FK-102 User Manual page 110

Specifications
Main product specifications relating to facsimile functions are indicated below.
Specifications are subject to change without notice.
Image memory capacity
Max. no. of stored pages
Applicable lines
Scanning line density
Transmission time
Coding methods
Max. scanning size
Max. recording size
5-2
Item
2M bytes (expandable in 2M bytes up to MAX. 16M bytes)
It is possible to choose 2M bytes or 4M bytes in image mem-
ory capacity by service.
Approx. 94 pages
(numbers of pages in the case of storing Konica standard
A4-size pages containing approximately 700 characters at
"fine" resolution)
Subscriber telephone lines (including facsimile communica-
tion networks)
PBX lines
G3 S-Fine:
Communications are performed at any of the above scan-
ning line densities according to the capabilities of the
remote station machine.
2400, 4800, 7200, 9600, 12000, 14400, 16800, 19200,
21600, 24000, 26400, 28800, 31200, 33660 bps
2 seconds
Time in the case of sending Konica standard A4-size
pages containing approximately 700 characters at "nor-
mal" resolution. This is the transmission time for the
image only, and does not include the time required for
communication control. Actual communication time varies
according to the contents of the originals, the type of tele-
phone line of the remote station and factors.
MH, MR, MMR, JBIG
11 inch x 17 inch (280 mm x 431 mm)
Width: 297 mm
Length: MAX. 800 mm (Long Original Mode)
11 inch x 17 inch (280 mm x 431 mm)
Originals in excess of 840 mm cannot be received.
When receiving originals longer than the paper size in the
paper trays, record the original after reducing.
Specifications
400 x 400 pixels / 25.4 mm
16 x 15.4 lines / mm
8 x 15.4 lines / mm
Fine: 200 x 200 pixels / 25.4 mm
8 x 7.70 lines / 25.4 mm
Normal: 100 x 100 pixels /25.4 mm
8 x 3.85 lines / mm