1750 Hz Tone Burst; Dtmf Memory Encoder; D Dtmf Send Menu - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT
A 1750 Hz tone is required to access most European
repeaters.
While holding down [PTT], push [F-3 TON] in the
M-1 display during repeater operation. (pp. 63, 66)
[MENU/GRP]
DTMF tones are used for autopatching, controlling
other equipment, etc. The transceiver has 4 DTMF
memory channels (D1–D4) for storage of often-used
DTMF codes sequence of up to 24 digits.
D
To transmit a DTMF code using a DTMF send menu,
program the desired code in advance as described
on next page.
[MODE]
[F-1]
[MENU/GRP] [F-2] [F-3] [F-4]
DTMF send menu
67
[F-3]
DTMF code
sequence
NOTE:
This function is not available for non-
European versions.
q Select FM mode with [MODE].
w Select S-1.
[MENU/GRP] for 1 second once or twice
to select the menu group S.
[MENU/GRP] momentarily one or more times
to select the menu S-1.
e Push [F-2 DTM] to enter the DTMF send menu.
The DTMF starting menu can be changed in the
miscellaneous (others) Set mode (see p. 134).
r Push [F-1 D1] — [F-4 D4] to transmit the DTMF
code.
D1"– "D4" are highlighted while transmitting.
steps). See next page for DTMF Set mode.
t Push [Z(
MENU/GRP )] twice to exit DTMF send
menu and return to the normal FM mode display.
Popup indication
appears.
[F-1 SND].