Operating Am - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT
q Push [Y(
BAND
)]/[Z(
band or push a band key on the HM-151.
w Push [MODE] momentarily or hold down for 1
second to select AM mode.
for 1 second to select from FM, WFM and AM modes.
e Rotate [DIAL] to tune in a desired signal.
signal is received.
be changed using the tuning step program mode. (p. 30)
r Rotate [AF] to set audio to a comfortable listening
level.
t Push [PTT] (microphone) to transmit.
[TX] indicator lights red.
y Speak into the microphone at your normal voice
level.
u Release [PTT] (microphone) to return to receive.
D
Push [P.AMP/ATT] momentarily to turn the
preamp ON or OFF.
" appears when the preamp is set to ON.
Hold down [P.AMP/ATT] for 1 second to turn the
attenuator ON.
[ P. A M P / AT T ] m o m e n t a r i l y t o t u r n t h e
attenuator OFF.
" appears when the attenuator is set to ON.
Push
or twice to select the twin PBT ON or OFF (M-ch
RIT).
selected.
Rotate
(p. 78)
Push [NB/ADJ] to turn the noise blanker ON or
OFF.
" appears when the noise blanker is set to ON.
Hold down [NB/ADJ] for 1 second to enter the
noise blanker Set mode, then rotate [DIAL] to
adjust the threshold level, or noise pulse width.
57
BAND
)] to select the desired
[MODE]
(p. 72)
(p. 77)
(switch) momentarily once
(controls–inner/outer).
CLR )] to clear the settings.
[AF] [MODE] [TX] indicator
"AM" appears
(p. 74)
While "M -3 " is selected, push [F-3 A G C ]
momentarily one or more times to select AGC
fast, AGC middle and AGC slow.
[MENU/GRP] for 1 second once or twice
to select the menu group M.
[MENU/GRP] momentarily one or more times
to select the menu M-3.
," " " and "
fast time constant, middle time constant and slow time
constant is selected, respectively.
While "M-3" is selected, hold down [F-3 AGC] for
1 second to enter the AGC Set mode.
[F-2 FAST], [F-3 MID] or [F-4 SLOW] to
select the time constant, then rotate [DIAL] to adjust
the time constant.
[ ]
[ ]
[DIAL]
" appears when the