Using The Viera Link "Hdavi Control - Panasonic SC-NC9 Operating Instructions Manual

Using the VIERA Link "HDAVI Control

,
u 2/REW
What is VIERA Link "HDAVI Control"?
VIERA Link "HDAVI Control" is a convenient function
that offers linked operations of this unit, and a Panasonic
television (VIERA) under "HDAVI Control". You can use
this function by connecting the equipment with the HDMI
cable.
See the operating instructions for connected equipment
for operational details.
This unit supports "HDAVI Control 2" function.
The TV with "HDAVI Control 2" function enables the
following operation:
VIERA Link Control only with TV's remote control (for
"HDAVI Control 2") (➡ page 38)
Preparation
• Confirm that the HDMI connection (➡ page 10) has
been made.
• Set "VIERA Link" to "On" (➡ "HDMI" tab, page 29).
• To complete and activate the connection correctly,
turn on all VIERA Link "HDAVI Control" compatible
equipment and set the television to the corresponding
HDMI input mode for the stereo system.
Whenever the connection or settings are changed,
reconfirm the points above.
One Touch Play
You can turn on the stereo system and television, and
start playing the disc in the play position with a single
press of a button.
Press [ONE TOUCH PLAY].
Stereo system speakers will be automatically activated (➡
right).
• This function also works if you press [q, DVD/CD] on
the stereo system remote control during stereo system
standby mode.
Note
• Playback may not be immediately displayed on
the television. If you miss the beginning portion of
playback, press [u] or [t] to go back to where
playback started.
q, DVD/CD
ONE TOUCH PLAY
t, SLOW/SEARCH
•
•
When the television is turned off, the stereo system goes
into standby mode automatically.
•
•
Only the stereo system turns off when you press [^] for
shutting it down. Other connected equipment compatible
with VIERA Link "HDAVI Control" stays on.
TM
"
Speaker control
You can select whether audio is output from the stereo
system or the television speakers by using the television
menu settings. For details, refer to the operating
instructions of your television.
Home Cinema
Stereo system speakers are active.
• When the stereo system is in standby mode, changing
the television speakers to stereo system speakers in
the television menu will automatically turn the stereo
system on and select "AUX" as the source.
• The television speakers are automatically muted.
• You can control the volume setting using the volume or
mute button on the TV's remote control. (The volume
level is displayed on this unit's FL display.)
• To cancel muting, you can also use the stereo system
remote control (➡ Muting the volume, page 13)
• If you turn off the stereo system, television speakers
will be automatically activated.
TV
Television speakers are active.
• The volume of the stereo system is set to "0".
– This function works only when "DVD/CD", "USB"
or "AUX" is selected as the source on the stereo
system.
• Audio output is 2-channel audio.
• When switching between the stereo system and
television speakers, the TV screen may be blank for
several seconds.
Auto input switching
When you switch the television input to:
– TV tuner mode, the stereo system will automatically
switch to "AUX".
– HDMI input mode for the stereo system, the stereo
system will automatically switch to "DVD/CD" if it is
"AUX" mode.
When you start disc play, the television will
automatically switch to the HDMI input mode for the
stereo system.
Power off link
This function works only when "DVD/CD", "USB" or
"AUX" is selected as the source on the stereo system.
When the television is turned on, the stereo system
does not turn on automatically. (Power on link is not
available.)
Note
37