Using The Viera Link "Hdavi Control Tm - Panasonic SC-PT70 Operating Instructions Manual

TRANSFER MODE
If you have chosen "480p"/"576p"/"720p"/"1080p" (progressive), "1080i"
(interlaced) ["VIDEO FORMAT" in Menu 4 (HDMI)], select the method of
conversion for progressive output to suit the type of material.
≥ The setting will return to "AUTO" or "AUTO1" when the disc tray is
opened, the unit is turned off or another source is selected.
When playing PAL discs
AUTO: Automatically detects the film and video content, and
appropriately converts it.
VIDEO: Select when using "AUTO", and the content is distorted.
Select this if the edges of the film
FILM:
content appear jagged or rough when
"AUTO" is selected.
However, if the video content is
distorted as shown in the illustration
to the right, then select "AUTO".
When playing NTSC discs
AUTO1: Automatically detects the film and video content, and
appropriately converts it.
AUTO2: In addition to "AUTO1", automatically detects film
contents with different frame rates and appropriately
converts it.
VIDEO: Select if the video content is distorted when using
"AUTO1" or "AUTO2".
SOURCE SELECT [DivX]
When you select "AUTO" the constructing method of the DivX contents
is automatically distinguished and output. If the picture is distorted,
select "INTERLACE" or "PROGRESSIVE" depending on which
constructing method was used when the contents were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
Menu 3 (Audio)
DIALOGUE ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher, with the dialogue
recorded in the center channel)
[DivX] (Dolby Digital, 3-channel or higher, with the dialogue recorded in
the center channel)
OFF, ON
Menu 4 (HDMI)
HDMI STATUS
HDMI
To show HDMI information
e.g.

CONNECTED STATE

AUDIO STREAM

MAX CHANNEL

VIDEO FORMAT

COLOUR SPACE
1 Connection status
2 Shows the output signal type.
(When "OFF" is selected in "AUDIO OUT" (
"– – –" will be displayed.)
3 Shows the number of audio channels.
4 ( right, VIDEO FORMAT)
5 ( right, COLOUR SPACE)
HD ENHANCER
This works when the HDMI connection is being used with "VIDEO
PRIORITY" ( 16, HDMI menu) set to "ON".
To sharpen the "720p", "1080i" and "1080p" picture quality
OFF, 1 (weakest) to 3 (strongest)
HDMI --- INFORMATION
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
16, HDMI menu),
VIDEO FORMAT
This works when the HDMI connection is being used with "VIDEO
PRIORITY" ( 16, HDMI menu) set to "ON".
To select suitable picture quality with your TV
(Video recordings will be converted to, and output as, high-definition
video.)
480p/576p/720p/1080p (progressive)
§
480i/576i/1080i (interlaced)
§
≥ If the picture is distorted, press and hold [CANCEL]F until the picture
is displayed correctly. (The output will return to "480p"/"576p".)
The numbers displayed depend on the disc being played. One of
§
the above numbers is displayed.
COLOUR SPACE
This works when the HDMI connection is being used with "VIDEO
PRIORITY" ( 16, HDMI menu) set to "ON".
To select suitable picture colour with your TV
YCbCr 4:2:2
YCbCr 4:4:4
RGB
≥ If the setting above is not compatible with your TV, it will not be
displayed.
Using the VIERA Link "HDAVI
Control "
TM
VIERA Link "HDAVI Control"
VIERA Link "HDAVI Control" is a convenient function that offers linked
operations of this unit, and a Panasonic TV (VIERA) under "HDAVI
Control". You can use this function by connecting the equipment with the
HDMI cable. See the operating instructions for connected equipment for
operational details.
≥ VIERA Link "HDAVI Control", based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers' equipment that
supports HDMI CEC cannot be guaranteed.
≥ This unit supports "HDAVI Control 4" function.
"HDAVI Control 4" is the newest standard (current as of December,
2008) for Panasonic's HDAVI Control compatible equipment. This
standard is compatible with Panasonic's conventional HDAVI
equipment.
≥ Please refer to individual manuals for other manufacturers' equipment
supporting VIERA Link function.
The TV with "HDAVI Control 2 or later" function enables the following
operation: VIERA Link Control only with TV's remote control (for
"HDAVI Control 2 or later") ( 14).
Preparation
≥ Confirm that the HDMI connection has been made (
≥ Confirm the audio connection to the AUX/TV terminal (
"AUX/TV" will be used as the TV audio setting for VIERA Link "HDAVI
Control".
≥ Set "VIERA Link" to "ON" ( 16, HDMI menu).
≥ To complete and activate the connection correctly, turn on all VIERA
Link "HDAVI Control" compatible equipment and set the TV to the
corresponding HDMI input mode for this unit.
Whenever the connection or settings are changed, reconfirm the points
above.
Auto lip sync
(Available when using VIERA Link "HDAVI Control" with
"HDAVI Control 3 or later" compatible TV)
This function automatically provides synchronised audio and video
output. (This works only when the source is "DVD/CD" or "AUX/TV".)
≥ When using "DVD/CD" as the source, set "TIME DELAY" in VIDEO
menu to "0 ms/AUTO" ( 15).
7).
7).
(Continued on next page)
13
13