Panasonic SC-NC9 Operating Instructions Manual page 25

Other Settings
If you have chosen "xxx
or "1080i" (interlace) (➡ "Video Output
Mode" in Picture Menu, page 24), select
the method of conversion for progressive
output to suit the type of material.
• The setting will return to Auto or Auto1
when the disc tray is opened, the unit is
turned off or another source is selected.
When you play NTSC disc
Auto1: Automatically detects the film and
video content, and appropriately
converts it.
Auto2: In addition to Auto1, automatically
detects film contents with different
frame rates and appropriately
converts it.
Video: Select when using Auto1 and
Transfer
Auto2, and the video content is
Mode
distorted.
When you play PAL discs, MPEG4 or
DivX video
Auto: Automatically detects the film and
video content, and appropriately
converts it.
Video:
Select when using Auto, and the
content is distorted.
Film:
Select this if the edges of the film
content appear jagged or rough
when Auto is selected. However,
if the video content is distorted
as shown in the illustration, then
select Auto.
When you select "Auto" the constructing
method of the DivX contents is
automatically distinguished and output. If
Source
the picture is distorted, select "I (Interlace)
Select
or "P (Progressive)" depending on which
DivX
constructing method was used when the
contents were recorded to disc.
Auto, I (Interlace), P (Progressive)
#
p" (progressive)
HD
Picture
Enhancer
HDMI
Colour
Space
■ Audio Menu
Dolby Pro
Logic II
Dialogue
Enhancer
This works when the HDMI connection is
being used and "Video Mode" (➡ "HDMI"
tab, page 29) is set to "On".
To Sharpen the "720p", "1080i" and
"1080p" picture quality
SC-NC9
Off 1
This works when the HDMI connection is
being used and "Video Mode" (➡ "HDMI"
tab, page 29) is set to " On"
To select suitable picture colour with
your television
RGB
YCbCr (4:4:4)
YCbCr (4:2:2)
SC-NC9
• If the setting above is not compatible with
your television, it will not be displayed.
• "RGB Range" (➡ "HDMI" tab, page 29) is
available when "RGB" is selected.
(➡ Enhancing the stereo sound: Dolby Pro
Logic II, page 35)
SC-NC9
To make the dialogue in movies easier
to hear
(Dolby Digital, DTS, MPEG,
DVD-V
3-channel or higher, with the dialogue
recorded in the center channel)
(Dolby Digital, 3-channel or higher,
DivX
with the dialogue recorded in the center
channel)
On Off
(sharpest picture)
2 3
25