Panasonic SC-NC9 Operating Instructions Manual page 7

Speaker installation options
SC-NC9
■ Assemblying the speakers for Bi-Amp TS mode
To enjoy better sound quality in Bi-Amp TS mode (➡ page 34, Refining the sound quality: Fi Mode), stack the
surround speakers on the front speakers.
2 Base stands
Supplied
accessories
1
Attach the base stands to the front speakers.
Long screws
Tighten
securely
4
Push and click the side lock cover to the
fastened metal bracket.
■ Positioning the speakers for Bi-Amp TS mode
( S B - P S 9 )
Center speaker
( S B - P F 9 )
Surround speaker
(left) on top of
front speaker (left)
Subwoofer
( S B - W N C 9 )
6 Metal 12 Short
brackets screws
Front speaker
Base stand
Metal bracket
Side lock cover
( S B - P S 9 )
( S B - P C 9 )
( S B - P F 9 )
Surround
speaker (right)
on top of front
3 0 3 0
o o
speaker (right)
4 Long 6 Side lock
screws cover
2
Place the surround speakers on the front
speakers.
3
Fasten the metal bracket with the screws at the
right, left and back of the speakers.
Surround
speaker
Front
speaker
Note
If you play 5.1 channel sources in this stack up assembly,
use Bi-Amp TS mode to enjoy better sound effect.
■ Attaching to a wall
You can attach the center
speakers to a wall.
1
Drive a screw (not
included) into the wall.
2
Fit the hole securely
onto the screw(s).
The wall or pillar on which
the speaker is to be attached
should be capable of
supporting 10 kg per screw.
Consult a qualified building
contractor when attaching the
speaker to a wall. Improper
attachment may result in
damage to the wall and
speaker.
1 Allen key
Short screws
Tighten
securely
Face the
protruding
portion of
the metal
bracket to the
speakers.
30 - 35 mm
7.5 - 9.4 mm
5 - 7 mm
3.0 - 4.0 mm
220 mm
7