Panasonic SC-NC9 Operating Instructions Manual page 14

Control reference guide
This unit
AC supply indicator (AC IN)
This indicator lights when the
unit is connected to the AC
mains supply.
Standby/on switch (8)
Press to switch the unit from on
to standby mode or vice versa.
In standby mode, the unit
is still consuming a small
amount of power.
Remote control sensor
EXT-IN: MUSIC P.,
AUX or AV
DISPLAY sound setting (17),
–DEMO function (below)
*, RECORD (33)
;, TAPE OPEN (32)
USB selector and play (40)
DVD/CD q,
DVD/CD selector and play
TAPE w q, Tape Play and
direction (32)
TUNER, BAND (31)
: Connect a USB device
MUSIC P.: Connect a portable
audio equipment (38)
#
AV only works when scart cable is
connected (➡ page 10).
Press and hold.
14
#
(38, 39)
USB q,
(40)
■ Demo function
When the unit is first plugged in, a demonstration of its functions may be shown on the
display.
If the demo setting is off, you can see a demonstration by turning on the demo.
The display changes each time the button is held down.
DEMO ON DEMO OFF
You can reduce the power consumed in standby mode by turning the demonstration off.
Phones: Headphone jack
Reduce the volume level and connect the headphone.
Headphone plug type: Ø3.5 mm stereo.
Avoid listening for prolonged periods of time to
prevent hearing damage.
Disc tray (5, 16)
r, selection button (34)
e ,
MANUAL EQ, SOUND
SC-NC9
FI MODE
SC-NC6 SUBWOOFER
Adjust sound field and
sound quality (34).
ENTER (17, 34)
;, DISC OPEN/CLOSE (16)
STOP (17)
g ,
u, i, 2/REW, 1/FF,
Skip, rewind, fast forward
(17, 31, 36)
VOL –, VOL +,
Rotate to adjust the volume
(16)
Cassette deck (32)
Press down to open the lid