The Radio - Panasonic SC-NC9 Operating Instructions Manual

The radio

Numbered
buttons
TUNER
u, i,
2/REW, 1/FF
PLAY MODE
Manual tuning
1
Press to select
"FM" or "AM".
• Press and hold [t] or [y] (this unit: [u, 2/REW]
or [i, 1/FF]) until the frequency starts scrolling to
start automatic tuning. Tuning stops when a station is
found.
"ST" is displayed when a stereo FM broadcast is being
received.
■ If noise is excessive
When "FM" is selected
Press [PLAY MODE] to display "MONO".
To cancel, press [PLAY MODE] again.
The mode also cancels when you change the
frequency.
FUNCTIONS
t, y,
SLOW/SEARCH
e, r
ENTER
u, 2/REW,
i, 1/FF
TUNER, BAND
2
Press to select the
frequency of the desired
station
Preset tuning
Preset channels to make selection simpler. Up to 30
stations can each be set in the FM and AM bands.
Automatic presetting
Press and hold [ENTER].
(Release when "PROGRAM" appears)
The tuner tunes to the lowest frequency and start to
preset the stations it can receive into the channels in
ascending order.
When finished, the last station to be set is played.
Manual presetting
1
To enter manual
presetting mode.
("PROGRAM" appears)
3
Press while the station is flashing to
select the channel.
The station occupying a channel is erased if another
station is preset in that channel.
Selecting the preset channels
Remote control only
1
Press [TUNER] to select "FM" or "AM".
2
Press the numbered buttons or [u, 2/REW] or
[i, 1/FF] to select the channel.
2
Select the frequency of
the desired station.
or
31