Nortel WLAN Access Port 223x Quick Installation Manual page 34

34 Ceiling-Mount Bezel Kit (Optional)
Figure - 11.
Assembling the WLAN — Access Port (223x) to the Flush-Mount Bracket
• Attach the cables to the sides of the WLAN — Access Port (223x).
Note:
Note:
Security Switch (2270) (Green/Power and Yellow/802.11b/g and/or Yellow or Amber/802.11a
LEDs lit), the WLAN — Access Port (223x) begins broadcasting its beacon signal(s). When this
happens, complete the installation as quickly as possible to remove yourself from within 8 inches
(20 cm) of the WLAN — Access Port (223x) to comply with FCC RF radiation exposure guidelines.
Ceiling-Mount Bezel Kit (Optional)
• To physically install the Nortel Networks WLAN — Access Ports using the optional Ceiling-Mount Bezel Kit
216394-B Rev 00
Ensure the cables are routed away from the WLAN — Access Port (223x) antennas.
When the WLAN — Access Port (223x) is powered up and is associated with a WLAN —