Nortel WLAN Access Port 223x Quick Installation Manual page 30

30 Ceiling-Mount Clips
Figure - 7.
Clipping the WLAN — Access Port (223x) and Ceiling-Mount Clips to a Hanging-Ceiling Rail
• Attach the cables to the sides of the WLAN — Access Port (223x).
Note:
Note:
Switch (2270) (Green/Power and Yellow/802.11b/g and/or Yellow or Amber/802.11a LEDs lit), the
WLAN — Access Port (223x) is broadcasting its beacon signal(s). When this happens, complete the instal-
lation as quickly as possible to remove yourself from within 8 inches (20 cm) of the WLAN — Access Port
(223x) to comply with FCC RF radiation exposure guidelines.
You have installed the WLAN — Access Port (223x). Repeat
(223x) on page 26
for each WLAN — Access Port (223x) location, and then continue with
Information on page 41
216394-B Rev 00
Ensure the cables are routed away from the WLAN — Access Port (223x) antennas.
When the WLAN — Access Port (223x) is powered up and is associated with a WLAN — Security
.
Step 4: Mounting the WLAN — Access Ports
Step 6: Returning MAC