Nortel WLAN Access Port 223x Quick Installation Manual page 28

28 Ceiling-Mount Clips
Note:
Switch (2270) (Green/Power and Yellow/802.11b/g and/or Yellow or Amber/802.11a LEDs lit), the
WLAN — Access Port (223x) is broadcasting its beacon signal(s). When this happens, complete the instal-
lation as quickly as possible to remove yourself from within 8 inches (20 cm) of the WLAN — Access Port
(223x) to comply with FCC RF radiation exposure guidelines.
• Slide the ceiling-mount base onto the drywall, sheet metal, or other screw heads until it snugs into place.
You have installed the WLAN — Access Port (223x). Repeat
(223x) on page 26
for each WLAN — Access Port (223x) location, and then continue with
Information on page 41
Ceiling-Mount Clips
When you are mounting the WLAN — Access Port (223x) on the extruded aluminium rails of a hanging ceiling, use the
ceiling-mount clips to mount the WLAN — Access Port (223x) as shown in the following figure and as described below:
216394-B Rev 00
When the WLAN — Access Port (223x) is powered up and is associated with a WLAN — Security
.
Ceiling-Mount Clips
Step 4: Mounting the WLAN — Access Ports
Step 6: Returning MAC