Using The Set Ip; Installing Set Ip - Gestetner DSm520pf User Manual

2.46 G
ETTING
Downloaded from ManualsPrinter.com Manuals

Using the Set IP

The Set IP can detect printers in the same network and display
the network information. In addition, this application can
configure the network information of the printer that has own
network interface card.

Installing Set IP

1
Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM driver does not automatically run:
Select Run from the Start menu, type X:\setup.exe in the
Open box (Where "X" is the drive letter for the CD-ROM
drive) and click OK.
2
Click Next.
3
Select Custom installation or Typical installation for a
network printer. Click Next.
4
Select your printer and then click Next.
N
: If your printer is not already connected to the computer,
OTES
the following window will appear.
• After connecting the printer, click Next.
• If you don't want to connect the printer at this time, click Next,
and No on the following screen. Then the installation will start
and a test page will not be printed at the end of the installation.
5
Check Set IP and then click Next.
S
TARTED