Table of Contents
Advertisement
6
To Use Set IP
Uninstalling the SmarThru
1
Select the program
you want from the
N
: Before beginning uninstallation, ensure that all applications
OTE
Available Scan
are closed on your computer. A system reboot is required after the
2
Destinations and click
software is uninstalled.
to add it to the
Repairing Software
Front Panel
Destination List. To
1
N
From the Start menu, select Programs.
OTE
delete the selected
CARD TEST PAGE. To Print the NETWORK PRINTER CARD TEST
program, click
PAGE, refer to "Printing a Network Configuration Page" on
Repair is required if your installation fails or the software does
Finish.
2
Select SmarThru 4, and then select Uninstall SmarThru
page A.5.
not work properly. This Repair procedure does not physically
Click to restore the
4.
repair SmarThru software.
default settings.
3
When your computer asks you to confirm, click OK.
3
Printer driver, Scanner driver, Printer Settings Utility and Set IP
programs could be repaired.
inters available on the network appears. Select
4
Click Finish.
ou want to install from the list and then click
1
Start Windows.
4
You may be prompted to restart your computer. In this case
you must shut the computer down and then restart it before
2
Start
From the
menu select
the changes will be saved.
is finished, a window appears asking
Type 103
Maintenance
age. If you so desire, select the
box(es) and click Finish.
Uninstalling the Network Scan Driver
3
Repair
Select
and click
Finish.
1
Start Windows.
N
: If your printer is not already connected to the computer,
OTES
xe, replacing "X" with the letter
the following window will appear.
and click OK.
2
After setup is complete, if your printer driver doesn't work
From the Start menu select Programs or All Programs
, reinstall the printer driver.
ScanClair Type 103
43.
3
When your computer asks you to confirm, click OK.
nected to the computer,
Allows you to edit
4
Click Finish.
a selected Phone
lling the SmarThru 4
not see your printer on the list, click Update to
Book entry in a
e list, or select Add TCP/IP Port to add your
separate Edit
s.
the network. To add the printer to the network,
window.
rt the supplied CD-ROM into your CD-ROM drive.
port name and the IP address for the printer.
CD-ROM should automatically run, and an installation
hared network printer (UNC Path), select
dow appears.
rinter [UNC] and enter the shared name
or find a shared printer by clicking the Browse
e installation window does not appear, click Start and
mplete, if your printer driver doesn't work
Run. Type X:\setup.exe, replacing "X" with the letter
uter
See "Repairing Software" on
nter driver.
h represents your drive and click OK.
• After connecting the printer, click
Downloaded from ManualsPrinter.com Manuals
f your
want to set a specific IP address on a specific
• If you don't want to connect the printer at this time, click
click the Set IP Address button. The Set IP
The Firmware Update Tab
Click the Firmware Update tab to update the firmware of your
machine. This feature should be used by an authorized
technician. Please consult with the purchase point.
The Scan Settings Tab
Click the Scan Settings tab to configure the scan destination
list that appears on the control panel display when you press
Scan-to on the control panel. Using the destination list, you can
select a software program that an image can be scanned to.
When the installation is completed, click Finish.
You can also configure the scan settings, such as the output type
and resolution.
From the Start menu, select Type 103 in Programs, and
click Set IP.
Click
to find printer on the local network, or click
and type the printer's MAC address.
: To configure the MAC address, see the NETWORK PRINTER
.
Type IP address, Subnet Mask and Default Gateway, and
then click [Config].
If it is successfully is completed, the printer prints
The Phonebook Tab
NETWORK PRINTER CARD TEST PAGE.
Click the Phonebook tab to create and edit Phone Book entries.
Programs
.
Next .
Start and
See "Repairing Software" on
Uninstall ScanClair Type 103.
Deletes a selected
Phone Book entry.
Next .
All Programs
or
Deletes all Phone Book
entries.
Next ,
Downloads the
settings made in the
Printer Settings Utility
to your machine.
Reads the Phone
Book entries from the
machine to the
Printer Settings
Utility.
Downloads the
Phone Book entries
from the Printer
Settings Utility to the
machine.
Phone Book entries
Allows you to set up
group dial numbers.
See page 2.50.
Advertisement
Table of Contents
