Setting Date And Time - Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual

Setting date and time

When the unit is turned on for the first time, a message asking you to set the date and time will
appear.
≥ Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time.
If the screen shows the incorrect date and time, then adjust it.
¬ Rotate the mode dial to select
1 Press the MENU button, then select [
CLOCK SET] # [YES] and press the joystick.
[
2 Move the joystick left or right to select the item to
be set. Then, move the joystick up or down to set
the desired value.
≥ The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥ The 12-hour system is used to display the time.
3 Press the joystick to enter the selection.
≥ After pressing the MENU button to finish the setting, check the date and time display.
≥ The clock function starts at [00] seconds.
or .
BASIC] #
Setting date and time
45
LSQT1011