Image Stabilizer Function - Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual

Image stabilizer function

This is for reducing image shakes (jitter) during recording.
Reduces the image shaking (jitter) due to hand movement when recording.
∫ VDR-D300
¬ Rotate the mode dial to select
Press the MENU button, then select [
# [ O.I.S.] # [ON] and press the joystick.
O.I.S.
∫ VDR-D250
≥ The image stabilizer function does not work in card recording mode.
¬ Rotate the mode dial to select
Press the MENU button, then select [
and press the joystick.
To cancel the image stabilizer function
Press the MENU button, then select [
press the joystick.
≥ This function's default setting is [ON].
≥ (VDR-D300 only) In the card recording mode,
pressing the PHOTO SHOT button halfway
increases the effect of the image stabilizer function.
(MEGA optical image stabilizer)
≥ When a tripod is used, we recommend that you turn
the image stabilizer off.
VDR-D300 (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
VDR-D250 (RAM) (-RW‹VR›) (-RW‹V›) (-R)
.
or
ADVANCED]
.
ADVANCED] # [
ADVANCED] # [
O.I.S.]/[
O.I.S.
≥ In the following cases, the image stabilizer function
may not work effectively.
– When the digital zoom is used
– When the unit is shaken greatly
– When you record a moving subject while tracking
it
– When recording in extremely dark places
(VDR-D250 only)
≥ The image stabilizer function does not work when
the MagicPix function is being used. (VDR-D250
only)
Various recording functions
EIS] # [ON]
EIS
EIS] # [OFF] and
EIS
67
LSQT1011