The date/time/time zone are recorded as meta data in the clip while shooting.
It will affect the management of the recorded contents, so always check and set the date/time and time zone before using the camera for the first time.
Do not change the setting of the date/time and time zone while shooting.
1
Press the <MENU> button.
The menu is displayed.
2
Select the [SYSTEM SETTINGS] menu → [CLOCK] → [TIME ZONE], and set the time difference from Greenwich Mean Time.
3
Select the [SYSTEM SETTINGS] menu → [CLOCK] → [CLOCK SETTING], and set the year, month, date, and time.
@
NOTE
t Accuracy of the clock is approximately ±30 seconds per month. Check and reset the time when accurate time is required.
t In the AVCHD format, clip will be save in +12:30 even selecting +12:45 due to format standards.
r Time zone table
Time difference
00:00 Greenwich
−00:30
−01:00 Azores
−01:30
−02:00 Mid‑Atlantic
−02:30
−03:00 Buenos Aires
−03:30 Newfoundland
−04:00 Halifax
−04:30 Caracas
−05:00 New York
−05:30
−06:00 Chicago
−06:30
−07:00 Denver
−07:30
−08:00 Los Angeles
−08:30
−09:00 Alaska
−09:30 Marquesas Islands
−10:00 Hawaii
−10:30
−11:00 Midway Islands
−11:30
−12:00 Kwajalein Atoll
+00:30
Chapter 3 Preparation — Setting the date/time of the internal clock