Lens Hood - Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual

Shoulder strap fixture
Put the strap through the fixture 1 and
through the stopper 2 so it will not come
off. Extend part 3 by at least 2 cm (1z).
Put the opposite end of the strap through A
and attach it in the same way.

Lens hood

In order to remove the lens hood, rotate it counter-clockwise A. In order to attach it, place into slot
B, and then rotate it clockwise C.
≥ (VDR-D300 only) The lens hood has a built-in lens cover.
B
A
Parts identification and handling
1
A
2
3
C
17
LSQT1011