Other Menus - Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual

Menus

Other menus

∫ [ REC LAMP]
≥ OFF ≥ ON
The recording lamp lights during recording and
flashes when the unit receives a signal from the
remote control. When this is set to [OFF], it
does not light during recording.
∫ [ DISPLAY]
≥ OFF ≥ ON
The screen indications are selected as shown
in the illustration below.
OFF
ON
∫ [ POWER SAVE]
≥ OFF ≥ 5 MINUTES
[OFF]: The power saving function is not
activated.
[5 MINUTES]:
When about 5 minutes passed without
any operation, this unit automatically
turns off to prevent the battery from
running down. When you use this unit,
turn it on again.
≥ In the following cases, the unit may not turn
off even when you set this to [5 MINUTES].
– When using the AC adaptor
– When connecting the unit to a computer or
printer via the USB cable
∫ [ BEEP SOUND]
≥ OFF ≥ ON
This allows operations such as starting and
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an
operation such as recording is started or
ended.
144
LSQT1011
;
12.15.2006
;
SP
0h00m00s
R 0h00m
O.I.S.
12.15.2006
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the computer or
the printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs e.g. recording not
starting. Check the sentence displayed on the
screen. (l 147)
∫ [ INITIAL SET]
≥ YES ≥ NO
When there is a menu that cannot be selected
depending on a combination of functions, set to
[YES] for changing the menu settings back to
the initial shipping condition.
(Language setting cannot be back to the initial
shipping condition.)
∫ [ JOYSTICK LED]
≥ OFF ≥ ON
If set to [ON], the circumference of the joystick
lights up in blue during operation.
∫ [ DEMO MODE]
DEMO
≥ OFF ≥ ON
This item is used to start the unit
demonstration.
(Only when using the AC adaptor and the mode
dial is at the or
If you set this to [ON] without inserting a disc or
an SD card, this unit is automatically set to the
demonstration mode for introducing its
functions. If any button is pressed or operated,
the demonstration mode is canceled. If no
operations take place for approx. 10 minutes,
the demonstration mode automatically starts.
To terminate the demonstration mode, insert a
disc or an SD card, or set this to [OFF]. For
normal use, set this function to [OFF].
position)