Installation (Windows); Installing Dvd-Ram Driver - Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual

Installation (Windows)

Installation (Windows)
When installing the software, log on to your computer as the Administrator or with a user name with
equivalent authorization. (If you do not have authorization to do this, consult your manager.)
Do not connect the USB cable before installing the DVD-RAM Driver.
If the DVD-RAM Driver is installed after connecting this unit and the computer with the
USB cable, this unit may not be correctly recognized by the computer.
(The DVD-RAM Driver has a driver for USB connection.)
≥ Before starting the installation, close any other software applications which are running.
≥ Do not perform any other operations on your computer while the software is being installed.
≥ Install DVD-RAM Driver and then install DVD-MovieAlbumSE or DVDfunSTUDIO.

Installing DVD-RAM Driver

1 Insert the CD-ROM into the computer.
The [Setup Menu] screen will appear.
≥ If the [Setup Menu] screen does not appear, double-click the CD-ROM drive
icon in [My Computer].
2 Click [DVD-RAM Driver].
≥ The software application may not run properly if you cancel the installation at
any point e.g. by pressing [Cancel].
3 Click [Driver and Formatter Setup].
≥ If an [Information] or [Question] message appears, continue to follow the
on-screen messages to install it.
4 Click [Next].
118
LSQT1011