Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual page 74

Manual recording functions
To set the white balance manually
1 Select [
2 Move the joystick up to select [
When the [
complete.
≥ When the [
cannot be set because the place is dark etc. In this case, use the
automatic white balance.
∫ About the white balance sensor A
The white balance sensor detects the type of light source during recording.
Do not cover the white balance sensor during recording, or it may not
function properly.
∫ About the black balance adjustment
This is one of the 3CCD system functions that automatically adjusts the black when the white
balance is set in the manual adjustment mode. When the black balance is adjusted, the screen will
temporarily be black. (The black balance cannot be adjusted manually.)
1 Black balance adjustment in progress. (Flashes.)
2 White balance adjustment in progress. (Flashes.)
3 Adjustment completed. (Lights up.)
≥ When the [
white balance previously adjusted is stored.
Whenever recording conditions change, re-set the
white balance for correct adjustment.
≥ When setting both the white balance and the iris/
gain, set the white balance first.
74
LSQT1011
], fill the screen with a white subject.
] display changes from flashing to on, setting is
] display continues flashing green, the white balance
] display flashes white, the manual
].
1 2
≥ (VDR-D250 only) When the unit is turned on with
the lens cap attached, the automatic white balance
adjustment may not function properly. Please turn
the unit on after removing the lens cap.
MNL
BACK
MNL
BACK
A
3