Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual page 128

Creating a DVD-Video disc on a computer (Windows)
3
(On the computer)
[start] # [All Programs (Programs)] #
Select
[Panasonic] # [DVD-MovieAlbumSE] #
[DVD-MovieAlbumSE].
DVD-MovieAlbumSE starts and the images recorded on the disc are displayed.
When starting DVD-MovieAlbumSE, the [Mount Information] dialog box may appear or the
recorded images may not be shown. If this occurs, try the following procedure. If there are
multiple drives, a drive other than this unit may be selected.
1) Click [Preference] on the dialog box or
DVD-MovieAlbumSE screen, and then click the [Device setting] tab.
2) Choose the drive where the disc is loaded in the [Drive Select] column, and then click [OK].
4
(When using a DVD-RAM only)
Edit the images on the disc as required.
5 Click
[Export all titles] or [Export a title].
6 Set the export settings in the [Export all titles] ([Export a
title]) screen and click [Start].
≥ It is recommended that you do not change the settings displayed on the screen.
7 When export is complete, a message will appear.
Check the small box for [Eject the disc being used.],
and then click [Yes].
DVD-MovieAlbumSE automatically closes and DVDfunSTUDIO
automatically starts.
8 Insert a brand-new DVD-RW or DVD-R disc into the unit.
128
LSQT1011
([Additional]) and select [File Export] #
([Preference]) button at top right of