Using An Sd Card On A Computer; (Macintosh); Connection - Panasonic VDR-D300 Operating Manual (English, Spanish) Operating Instructions Manual

Using an SD card on a computer (Macintosh)
Using an SD card on a computer (Macintosh)

Connection

¬ Connect this unit to the AC adaptor.
¬ Insert an SD card with recorded images in the unit, turn on the unit and then
rotate the mode dial to select
1 Press the MENU button, then select [
# [ USB FUNCTION] # [PC CONNECT] and
press the joystick.
≥ Press the MENU button to exit the menu screen.
2 Connect this unit and a computer.
A USB cable (supplied)
≥ Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
icon appears.
≥ Do not use any other USB cables except the supplied
one. (Operation is not guaranteed with any other USB
cables.)
≥ When the unit is connected to a computer, the
operation mode cannot be changed and its
power cannot be turned off.
In this case, disconnect the USB cable (l 141).
140
LSQT1011
.
SETUP]
≥ When a computer is accessing a card in this unit,
the card access lamp lights. (
LCD monitor.) Do not disconnect the USB cable or
AC adaptor while the card is being accessed as it
may damage the data.
A
appears on the