Panasonic AW-HE870N Operating Instructions Manual page 94

Troubleshooting
Symptom
Cannot operate
using the controller
Cannot operate the
lens
Cannot display the
menus
Cause and remedial action
 It may be necessary to upgrade the version of the controller so that the
controller will support the unit.
 Consult with your dealer.
 When the AW-RP400 pan-tilt control panel and the AW-CB400 remote
operation panel are used in combination, a setting that prohibits the
operation of one of these units may have been selected.
 Refer to the Operating Instructions of the controller.
 Check that the unit and lens have been connected properly.
 Check that the iris selector switch on the lens is set to AUTO.
 Is the designated lens being used?
 Has OFF been set for the character output selection of the output
connected to the monitor?
 Check the character output selection. Even if OFF is selected, characters are
displayed in all outputs for up to one minute after operation has been started.
 When the pan-tilt head and controller are being used
 Is the unit connected to the pan-tilt head and controller properly?
 Refer to the Operating Instructions of the pan-tilt head or the controller.
- 94 -
Reference
pages
—
—
P.19, P.52
P.19
P.69, P.85
P.17,
P.24 to 26