Panasonic AW-HE870N Operating Instructions Manual page 31

System configuration (Connections)
Connection of the Indoor Pan-tilt Head AW-PH400 (continued)
When an SDI card (AW-HHD870) has been installed
 Use a coaxial cable to connect the SDI OUT connector on the SDI card and the SDI IN connector on the AW-PH400.
 Use a coaxial cable to connect the SDI connector on the AW-PH400 to the SDI input connector on the color monitor.
Note
 HD (1080i or 720p) analog component signals cannot be output from the AW-PH400.
 AW-IF400 Switch settings (when the AW-RP555/AW-RP655 is used)
SET UP
SW1 SW2
1 2 3 (Tilt range) 4
ON OFF
OFF OFF ON OFF OFF
(300 deg.) (190 deg.)
- 31 -