Mounting The Camera Onto A Pan-Tilt Head, Tripod, Camera Mounting Bracket, Or Other Part - Panasonic AW-HE870N Operating Instructions Manual

Mounting
 Mounting the camera onto a pan-tilt head, tripod, camera mounting
bracket, or other part
1. Use the camera mounting screw holes to mount onto a
pan-tilt head, tripod, camera mounting bracket, or other
part.
2. Fit the supplied mounting spacer into the camera
mounting screw holes on the camera's top surface when
mounting the camera with its bottom surface, or on the
camera's bottom surface when mounting the camera
with its top surface, and attach the drop-prevention wire
using the mounting screw (M4).
When the unit is to be mounted onto a Panasonic pan-tilt
head, use the mounting screws and drop-prevention wire
that are supplied with the pan-tilt head.
When the unit is to be mounted onto a tripod, camera
mounting bracket, or other part, refer to page 14, and
provide your own drop-prevention wire, mounting screws,
and washers.
The connection and installation should be done by qualified service personnel
or system installers. Refer any servicing to qualified service personnel.
- 20 -
Camera mounting screw holes
(Inch screws: 1/4-20UNC),
Depth: 3/8˝ (10 mm)
Camera mounting adapter