Panasonic AW-HE870N Operating Instructions Manual page 47

How to operate the system
 Control exercised from the Multi Hybrid Control Panel AW-RP555
(continued)
*1 : The lamp of the ABB or AWB switch flashes while automatic white balance or automatic black balance is being executed,
respectively. When ABB or AWB is completed successfully, the corresponding lamp goes off; when it is not completed
successfully, it lights up.
*2 : The switch lights without AWB being executed when the white balance mode of the main unit is ATW, PRESET 3200K, or
PRESET 5600K, or when the Color Bar is being displayed.
*3 : Flashing stops when communication is disconnected because the OPERATE switch has been turned OFF, CAMERA SELECT has
been switched, the communication cable has been disconnected, etc.
*4 : The switch lights without ABB being executed when the Color Bar is being displayed.
*5 : When PRESET 3200K or PRESET 5600K is selected in the camera menu, everything turns off.
- 47 -