Panasonic AW-HE870N Operating Instructions Manual page 58

Adjustment
• When adjusting the phase of SD signals
Observe the waveforms of the external synchronizing
input signal (black burst signal) and video output signal
on a two-channel oscilloscope.
Then match the horizontal phase of both signals by
adjusting them with the horizontal phase control of the
camera menu.
Adjust the horizontal phase
Adjustment by camera menu
 Press the DOWN/BAR switch for over 2 seconds to
display the color bar.
 Press the MENU switch for 3 seconds or more to display
the main menu.
 Press the UP/ABB switch or the DOWN/BAR switch to
move the cursor to [G/L Set], then press the ENTER/AWB
switch to display the G/L Set sub menu.
Genlock input signal
(black burst)
Video signal
 Select [H Phase] on the G/L Set sub menu.
 Adjust the horizontal phase with the UP/ABB and
DOWN/BAR switch.
The level of [H Phase] adjustment can be selected with
[H Phase, SC Fine Step].
G/L Set
H Phase
SC Coarse
SC Fine
H Phase,SC Fine Step
Return
- 58 -
MENU switch
ENTER/AWB switch
UP/ABB switch
DOWN/BAR switch
0
90deg
0
1