Panasonic AW-HE870N Operating Instructions Manual page 78

Menu item setting/changing (User Mode)
 SD (480i) Detail Set
 Detail level setting [Detail: Off, Low, High]
Contour correction quantity can be selected.
Detail settings made using the horizontal/vertical detail
level high/low setting.
 Horizontal detail level high setting
[H Detail Level H: L+1 to +63]
 Vertical detail level high setting
[V Detail Level H: L+1 to +31]
 Horizontal detail level low setting
[H Detail Level L: 0 to H–1]
 Vertical detail level low setting
[V Detail Level L: 0 to H–1]
Detail level can be set in horizontal (H) and vertical (V)
directions with the detail level setting at "High" or "Low".
Whichever the direction, H or V, the set level at "High"
must be at least one position higher than that at "Low".
 Detail band setting [Detail Band: 1 to 5]
A contour correction band can be set with the detail level
setting at "High" or "Low".
The higher setting, the finer will be the detail.
 Noise suppress level setting
[Noise Suppress: 1 to 10]
Screen noise can be reduced with the detail level setting
at "High" or "Low".
If the noise suppress level is set too high, a fine object
will be reproduced less sharply.
 Level dependent level setting
[Level Dependent: 0 % to 25 %]
Screen noise due to the detail of dark parts of an object
can be reduced.
If level dependent level is set too high, however, hair, for
example, will be reproduced less sharply.
- 78 -