Panasonic AW-HE870N Operating Instructions Manual page 28

System configuration (Connections)
Connection of the Indoor Pan-tilt Head AW-PH360 (continued)
When an SDI card (AW-HHD870) has been installed
 Use a coaxial cable to connect the SDI OUT connector on the SDI card and the SDI IN connector on the AW-PH360.
 Use a coaxial cable to connect the Pr/SDI OUT connector on the AW-PH360 to the SDI input connector on the color monitor.
Notes
 HD (1080i or 720p) analog component signals cannot be output from the AW-PH360.
 Refer to the operating instructions of the AW-PH360 for details relating to internal switch settings, etc.
of the pan-tilt head.
 Use the AW-LZ17MD9AG lens when using the camera mounted on the pan-tilt head AW-PH360.
Lenses other than the AW-LZ17MD9AG cannot be used.
Do not mount the camera on the AW-PH360 when the AK-LZ20M85G is installed.
Weight balance cannot be secured.
 AW-IF400 Switch settings (when the AW-RP400 is used)
SW1 SW2
1
OFF ON OFF
SET UP
2 3 4
ON OFF OFF
- 28 -